Boat Dolly with 49cm Beach Wheels

P/N: WZ1-BD-49UB

This Boat Dolly model has 49cm Beach Wheels to go over soft sand or any other difficult terrain. Its payload capacity is 220 kg and the frame is made with marine grade anodized aluminium. The lenght, widht and height of the frame are adjustable to adapt its size to several types of boats. 

The Boat Dolly includes: 

• - 4 main frame sections
• - 2 assembled uprights with rollers
• - 1 assembled bow stop roller
• - 1 cross strap
• - 2 axles with Quick Clip Pins (QCP)
• - 7 Wire Lock Pins (WLP)
• - 1 Handle with foam grips

1. Lenght adjusts to accommodate boats up to 5.8m long
2. Width adjusts to accommodate boats up to 2.1m width
3. Height adjust vertical uprights to increase ground clearence
4. Adjustable sling support strap cradles the boat hull
5. Marine grade aluminium frame anodized inside and outside
6. Stainless Steel hardware
7. Five Wheel options

Capacity, weight and dimensions: 

Payload capacity	220kg
Frame weight	22kg
Wheels weight	5.6kg
Frame length range	224cm to 315cm
Tongue Lenght: Adjustable in 16.5cm increments. This measurement is taken from the most forward end of the Angled Tongue section to the aft part of the Axle Cross Beam.
Frame width range	152cm to 241cm
Axle Cross Beam: Adjustable 15cm increments. Note that each side adjusts 15cm; subsequently, adjusting both sides equals 30cm.
Upright stanchion height range	36cm to 46cm
Strap Support Height: Adjustable in 2.5cm increments. This measurement is taken from the top of the Axle Cross Beam to the top of the Upright Stanchion Roller.
- Boat Dolly Assembly Instructions

Material

  - Boat Dolly Assembly Instructions

- Boat Dolly Test